File information: | |
File name: | RXA3010_FIRMWARE UPDATING.pdf [preview RXA3010 FIRMWARE UPDATING] |
Size: | 1456 kB |
Extension: | |
Mfg: | Yamaha |
Model: | RXA3010 FIRMWARE UPDATING 🔎 |
Original: | RXA3010 FIRMWARE UPDATING 🔎 |
Descr: | Yamaha RX RX-A3010 & V3071 RXA3010_FIRMWARE UPDATING.pdf |
Group: | Electronics > Other |
Uploaded: | 02-02-2022 |
User: | Anonymous |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name RXA3010_FIRMWARE UPDATING.pdf RX-A3010/RX-V3071 RX-A3010 FIRMWARE UPDATING PROCEDURE RX-A3010/RX-V3071 IMPORTANT NOTICE Do not attempt to update your Yamaha receiver using any other data file except those provided directly from the Yamaha website or through your network connection. Follow the instructions carefully and do not attempt any other procedures not specified in the instructions provided by Yamaha. Improperly updated products may cause improper operation, and any parts or service required to restore proper operation will not be covered under the Yamaha Limited Warranty. Choose from the following 2 methods to update to the latest firmware. Click here for Firmware Update Through the Internet (Connection to the Internet is required) Click here for Firmware Update by USB (A USB thumb drive is required) In case of error, see the Troubleshooting section 183 RX-A3010/RX-V3071 RX-A3010 RX-A3010/RX-V3071 Firmware Update Through the Internet Requirement: Internet connection Your receiver is connected to the Internet if you can receive Internet radio stations. (See owner's manual for details) 1 Power off the receiver (Standby mode) 2 Enter the ADVANCED SETUP mode While pressing the STRAIGHT button, press the MAIN ZONE button and keep STRAIGHT button pressed until " " appears on the front panel display. * " " is displayed only for a few seconds. 3 Select "FIRM UPDATE" from the menu a. Press the PROGRAM button until " " is displayed. b. Then, press STRAIGHT button until " " is displayed. 4 Start firmware update a. Press INFO button to start the update. (Update process may take up to 15 minutes) * If " " appears, this means your receiver is already up-to-date. In this case, power off to exit from Advanced Setup. Your AV receiver is ready fo |
Date | User | Rating | Comment |